Products

12-layers High Frequency PCB
Layer Misalignment Control Technology and Its Manufacturing Challenges in 12-Layer Hybrid PCBs
The control of layer misalignment is one of the most significant challenges in manufacturing 12-layer hybrid PCBs, especially for high-frequency, high-speed printed circuit boards (PCBs) with multiple layers, high thickness, large sizes, and demanding precision requirements. Maintaining layer alignment is critical to prevent defects like internal short circuits in 12-layer hybrid PCBs.
Challenges:
Small Tolerances: The minimum distance from the inner layer hole to the trace is just 0.15 mm, which exceeds typical process capabilities, leading to potential alignment errors in 12-layer hybrid PCBs.
Material Expansion Issues: 12-layer hybrid PCBs often use two materials with different coefficients of thermal expansion (CTE). During the lamination process, these materials expand and contract at different rates, making alignment difficult if not carefully controlled. Incorrect lamination parameters can cause misalignment due to the thermal expansion mismatch.
High Pressure During Lamination: Multi-layer PCBs, such as 12-layer hybrid PCBs, require high-pressure conditions (typically 300-450 psi) during lamination. The pressure can cause layer misalignment, leading to internal short circuits if the layers shift relative to one another.
Positioning Methods:
To address these challenges, precise positioning is required before lamination to ensure that layers in 12-layer hybrid PCBs remain aligned during the process. The industry uses several positioning methods:
Fusion Positioning: An electromagnetic fusion machine generates heat to solidify the interlayer adhesive film, achieving the desired fixation. This method is typically used for thin core board thicknesses but is less effective for thicker designs in 12-layer hybrid PCBs.
PIN-LAM Positioning: This method uses a fixed chassis fixture with PIN needles to ensure each layer of the core boards in 12-layer hybrid PCBs remains fixed in place during lamination. While this provides high positioning accuracy and minimal sliding, its efficiency is one-tenth that of fusion riveting, and it has low material utilization due to the fixed size of the chassis fixture.
Riveting Positioning: The edges of the inner layer core boards are punched to a fixed position, and then a riveting machine passes a die through the layers, securing them together with rivets. This method is efficient but has limitations with larger, thicker 12-layer hybrid PCBs (e.g., communication boards or thick copper power supply boards). It can lead to sliding during lamination, which compromises alignment. Existing riveting pins may not be suitable for large PCB products like supercomputer node boards.
Solution:
To overcome the challenges of layer misalignment in 12-layer hybrid PCBs, a specialized rivet design is used to increase the fixing force during riveting. This solution does not require the less efficient PIN-LAM method and ensures precise layer alignment without wasting materials.
The rivet design increases the thickness of the hole wall without adding bulk to the rivet section, ensuring a secure fit for larger 12-layer hybrid PCBs.
Specific parameters are implemented to ensure correct riveting, such as the length of the thickened hole wall (h=hl+0.1 mm) and the width of the riveting machine's flower opening (k1=1.5 mm).
This approach offers several advantages:
Improved alignment accuracy after lamination for thick or large 12-layer hybrid PCBs.
Increased material utilization rate and production efficiency, reducing resource waste.
Cost-effective, reducing the need for expensive and inefficient methods like PIN-LAM.
Conclusion:
By using specially designed rivets, this method resolves the misalignment issues that often arise during the lamination of 12-layer hybrid PCBs, improving both the manufacturing process and the final product quality. The solution ensures precision and efficiency, making it ideal for high-performance applications, including communication boards and high-speed circuit boards.
Hot Tags: 12-layers high frequency PCB, China 12-layers high frequency PCB manufacturers, suppliers, factory








